Abbott Endurity Core - Page 43

Table 9. Device measurements
Model Dimensions (h x l x t)
(mm)
Weight (g)
Displaced volume (cm
3
)
PM3222 55 x 59 x 6 24 14
PM3262 56 x 59 x 6 27 15
PM3542 56 x 59 x 6 26 15
PM3562 56 x 59 x 6 26 15
Device Materials
Table 10. Device materials
Model Can Case coang Header Septum
All devices Titanium
(60‑80%)
None May contain one or more of the following:
▪ Epoxy (20‑40%)▪
▪
Thermoplasc Polyurethane (up to 30
%
)
▪
▪ Polysulfone (1%)▪
▪
Silicone Elastomer (<1%)
▪
Silicone Elastomer and
Adhesive (1%)
NOTE: Percentages in parentheses indicate the range of total surface area of paent contact. Percentage
within range may vary based on model type.
41