To Next PageTo Next Page
Need help?Do you have a question about the Abbott Optimum Xceed and is the answer not in the manual?
General| Blood Sample Size | 0.6 µL |
|---|---|
| Test Time | 5 seconds |
| Battery | One 3-volt lithium battery (coin cell type CR2032) |
| Dimensions | 99 mm (L) x 43 mm (W) x 17 mm (H) |
| Weight | Approx. 42 g (1.5 oz) with battery |
| Memory | 450 test results |
| Measurement Range | 20-600 mg/dL |
| Operating Conditions | 50-104°F (10-40°C), 10-90% relative humidity |
Specifies the intended purpose and user for the Optium Xceed system.
Explains how the blood glucose and ketone monitoring system functions.
Lists all components included in the Optium Xceed meter kit.
Describes the purpose and functions of the meter's buttons.
Guides on setting up beeper, date, time, and measurement units.
Details the steps for setting the meter's time and date values.
Details how to set the preferred time and date display formats.
Explains how to set blood glucose units (mg/dL or mmol/L).
Explains why and when meter calibration is necessary for accurate results.
Provides step-by-step instructions for calibrating the meter.
Details how to check and match LOT numbers for calibration accuracy.
Lists essential items needed for blood glucose testing.
Important safety and usage information before testing blood glucose.
Step-by-step guide on how to perform a blood glucose measurement.
Instructions on how to get a blood sample from fingertips or alternative sites.
Guidance on correctly applying a blood sample to the test strip.
Interprets different glucose readings, including LO and HI results.
Identifies conditions and situations when ketone testing is important.
Lists the necessary items for performing blood ẞ-Ketone tests.
Key information and precautions for monitoring blood ẞ-Ketone.
Step-by-step instructions for measuring blood ẞ-Ketone levels.
Explains how to understand blood ẞ-Ketone readings and high results.
Explains why control tests are vital and when to perform them.
Provides detailed instructions for performing a control solution test.
How to interpret control solution test results and troubleshoot issues.
Information on the meter's memory capacity and stored events.
Instructions on how to access past blood glucose and ketone results.
How to view average blood glucose results over different periods.
Explains the process for downloading test results to a PC.
Lists and explains common error messages displayed by the meter (E-1 to E-4).
Provides actions to take for error codes E-5 through E-9.
Details the meter's size, weight, power source, and battery life.
Specifies temperature/humidity ranges and data port availability.
Outlines meter functions and required assay ranges for testing.
Guidelines for cleaning the meter without damaging it.
Steps for replacing the meter's battery and resetting settings.
How to get help and support for the Optium Xceed meter.
Information on the meter's guarantee period and limitations.
Lists scientific papers and sources referenced in the document.
Explains the meaning of symbols used on the meter and packaging.
