Abit AL8 - Superio Device

BIOS Setup 3-21
USB Mouse Support
This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS
environment.
Onchip Audio Controller
This option enables or disables the audio controller.
IEEE 1394 Controller:
This option enables or disables the IEEE 1394 controller.
# SuperIO Device:
Click <Enter> key to enter its submenu:
POWER ON Function:
This item selects the way you want your system to power on.
[Password]: Use a password to power on the system, select this option then press <Enter>. Enter your
password. You can enter up to 5 characters. Type in exactly the same password to confirm, and then press
<Enter>.
[Hot KEY]: Use any of the function keys between <F1> to <F12> to power on the system.
[Mouse Left]: Double click the mouse left button to power on the system.
[Mouse Right]: Double click the mouse right button to power on the system.
[Any KEY]: Use any keyboard keys to power on the system.
[Button Only]: Use only the power button to power on the system.
[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to power on the
system.
NOTE: To enable this “Power On” function, the wake-up header of [USB-PWR2], [USB-PWR3] must
be set to [Enabled] position. Please refer to the configuration of “Wake-up Header” [USB-PWR2], and
[USB-PWR3] in section 2-4, chapter 2.
User’s Manual