21Intended use
|
English
Intended use
The Wallbox eM4Single has a single charging socket and is suitable for group installations in semi-public
areas. It is also recommended for charging in public and private areas. The eM4Single is available either as
a Controller or Extender version for use in a charging group, but can also be set up for stand-alone use. To
ensure intuitive management and billing of all charging operations, the eM4Single Wallbox is available as a
reevready version with backend connection.
Technical information
This document explains how to operate your Wallbox eM4Single after it has been installed, configured and
commissioned by a qualified specialist electrical contractor. Detailed information on installation and config-
uration can be found in the installation instructions, which are provided in digital form (PDF) via the website
www.ablmobility.de/en. In addition, the technical data for your wallbox are collated in product-specific data
sheets.
Technical information User
Specialist electrical
contractor
x Operating manual (this document)
x Data sheets
x Installation manual
You can download these documents from the ABL website using the following link:
https://www.ablmobility.de/en/service/downloads.php
You can find further information about our product range, as well as about separately available accessory
components on our website at www.ablmobility.de/en.
Safety instructions
DANGER
Dangerous electrical currents
The violation or non-observance of the safety information contained in this manual may lead to electric
shock, fire, severe injury and/or death.
x Please read all safety information carefully.
x Always follow all safety notices provided!
Please observe the following notes:
General safety information
x Please read this manual carefully.
x Heed all warnings and follow all instructions.
x Keep this manual in a safe place where it can be accessed at all times: The contents of this manual, and
the safety notices in particular, must be available to all users of the product.
English