ABL Wallbox eM4 Single - Taking the Wallbox out of Operation

28
|
Taking the Wallbox eM4Single out of operation
2 Locate and press the push button engraved T.
x The RCCB must now trip and flip the toggle
switch into the centre position.
1
+
0
1
0
1
0
1
0
3 Now flip the pivot lever first to the 0position
and then back to the Iposition.
4 Close the RCCB flap and lock it with the key.
DANGER
Dangerous electrical currents
Should the RCCB malfunction during testing, you must not continue to operate the wallbox under any
circumstances!
x Take the wallbox out of operation (see next section) and contact a qualified specialist electrical
contractor to resolve the error.
Taking the Wallbox eM4Single out of operation
In case of severe malfunctions or damage to the device, you must take the Wallbox eM4Single out of opera-
tion. To do so, proceed as follows:
1 Unlock the wallbox’s side RCCB flap using the
key supplied and flip it up.