Quantization Options.
Swing Amount determines the amount of swing that will be applied to
the quantized notes. Note that the Swing amount can be adjusted with
the first encoder or using the dedicated Swing and Tempo encoder.
Quantize To sets the nearest note value to which notes will be
quantized, while Quantize Amount determines the amount of
quantization that is applied to notes.
To automatically quantize notes during recording, set the Rec. Quantize
option to On by pressing the corresponding upper display button.
Adjust the Quantize To value with the corresponding encoder. Note that
if Rec. Quantize is enabled, adjusting the Swing amount during
recording will not affect the automatically quantized notes.
When working with drums, press and hold Quantize, then press a Drum
Rack pad to quantize the notes for that selected pad only.
8.6 Arrangement Recording
When using Push in Control Mode, if Arrangement View is in focus in
Live, pressing Record on Push will toggle Arrangement Recording on
and off. While Arrangement Recording is on, all of your actions on Push
are recorded into the Arrangement View.
You can also trigger Arrangement Recording while Live’s Session View
is in focus by holding Shift and pressing Record. Note that this behavior
is reversed when the Arrangement is in focus; holding Shift and
pressing Record will then toggle Session recording.
9 Clip View
To Next Page
Loading...
Need help?
General
