volume after a pad is hit, while Fade Out specifies the amount of time it
takes for the sample to fade to silence. You can use these parameters
to shape the volume of the sample.
The Transpose encoder allows you to transpose the sample up or down
by up to 48 semitones (four octaves). Note that when transposing, the
timbre of the sample may change dramatically depending on which
warp mode is selected in the Warp parameter bank. The Gain encoder
sets the overall volume of the Simpler instrument.
11.3 Legato Playback
The Classic and One-Shot Modes provide a unique way of repitching a
sample on the fly, without changing its playback position. This is
essentially a playable version of Live’s Legato Mode in clips. To enable
Legato playback:
1.
Open Simpler’s full bank of parameters by pressing its
corresponding upper display button in Device View.
2.
Press the second lower display button to view the Global
parameter bank.
3.
Set the Glide Mode parameter to Glide.
4.
Set the Voices parameter to 1. Note that this parameter is only
available in Classic Mode. In One-Shot Mode, playback is always
monophonic.
To Next Page
Loading...
Need help?
General
