Ableton Push 3 User Manual

Press Master again to return to the previously selected track.
14.2.2 Track Mix Mode
Press the Mix button again to get to Track Mix Mode. In this mode, use
the two leftmost upper display buttons to select between Mix, where
you can mix the selected track’s parameters, and Input & Output,
where you can set the input and output routing options for the track.
You can use the lower display buttons or left and right arrows on
Session D-pad to navigate between tracks. With the Mix option
selected, the corresponding encoders adjust the volume, pan, and
send levels for the currently selected track. Hold Shift while adjusting
the encoders for fine-tune control.
The Mix Controls in Track Mix Mode.
If your Set contains more than six return tracks, arrows will appear in
the upper right corner of the display and you will be able to use the two
rightmost upper display buttons to move between the tracks.
7/29/23, 9:32 AM
Page 173 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)