Viewing Additional Sends.
With the Input & Output option selected, all of the track’s routing and
monitoring options can be adjusted from the encoders.
Input & Output Settings in Track Mix Mode.
The first encoder allows you to set the track’s monitor setting or switch
off monitoring altogether.
Turn the second encoder to switch between Input and Output settings.
When Input is selected, you can choose the Input Type for the track
using the third encoder and Input Channel with the fourth encoder. If
the Input Type is set to another track, the signal received can be
tapped from one of three different positions: Pre FX, Post FX, and Post
Mixer, which you can select using the last encoder: .
To Next Page
Loading...