Ableton Push 3 User Manual

Input Settings for a MIDI Track.
When adjusting the Output settings, you can set the Output Type and
Channel with corresponding encoders.
14.3 Rack and Group Track Mixing
Tracks that contain Instrument or Drum Racks can be distinguished by
icons displayed next to the track name.
A Track Containing an Instrument Rack.
These types of devices can be unfolded, allowing you to use the Mix
Modes for individual chains. You can also unfold Group Tracks in this
way, and mix the individual tracks included within a group.
To unfold a Rack or a Group Track, select it using the corresponding
lower display button. Then press this button again. The Group Track or
Rack will unfold, revealing the enclosed tracks or chains. An unfolded
track appears in the display with an underline that extends to the end of
the enclosed tracks or chains. Each press of a selected track’s lower
display button will toggle it open or closed.
7/29/23, 9:32 AM
Page 175 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)