Holding the Layout button gives you momentary access to the loop
length controls so that you can set or adjust the clip’s loop length as
needed. You can also lock the loop length controls in place by holding
Shift and pressing the Layout button. To unlock the loop length pads,
press the Layout button again.
6.3 64 Pads Layout
You can also use the entire 8x8 pad grid for real-time drum playing.
There will be pads available on the grid for however many filled Drum
Rack pads there are, up to 64 in total. This is useful when working with
very large drum kits, such as those created by slicing. To switch to 64
Pads mode, press the Layout button again.
To Next Page
Loading...