Abov E-PGM+ - Introduction

1. Introduction E-PGM+ / E-GANG4/6 / E-PGM Serial User’s Manual
6
1 Introduction
E-PGM+, E-GANG4/6 and E-PGM Serial series are the universal programming equipment for the
ABOV Semiconductor’s MCU series, delivering superior performance and reliability.
This product line-up has the following features:
 Fast programming speed for mass manufacturing
 Standalone programming and automated programming
 Supports USB (2.0 Full-Speed) interface with Microsoft Windows.
 Built-in protection circuit for the Programmer and programmed device
 Data port inputs are protected against ESD up to 15kV.
 Supports single chip programmer mode using socket for a device (Except for E-PGM
Serial).
 Supports Gang programmer mode using four or six socket devices.
 Supports On-board Programmer using In-System Programming (ISP) mode.
 Up to 1Mbit internal Flash memory for target binary or hex format data
 Programming supports the main code area and the option area as well.
(a) E-PGM+
(b) E-PGM Serial
(c) E-GANG4
(d) E-GANG6
Figure 1. Programmer