Abov E-PGM+ - Device Selection

E-PGM+ / E-GANG4/6 / E-PGM Serial User’s Manual 3. Software
33
3.4 Device Selection
The E-PGM+ PC program is used jointly by E-Gang4 and E-Gang 6. The number of ports is
displayed in the GUI when any of the products is connected: 1 port for E-PGM+ and E-PGM Serial;
4 ports for E-GANG4; 6 ports for E-GANG6.
Figure 37. Port Selection
To prepare for programming, users can select a device by following the procedure below:
Figure 38. Device Selection, Load Hex, and Update