Absima CR4T Ultimate - Boat Mode; Brake Mixing

24
Digital proportional radio control system
6.15 Boat Mode
This function is used only when you are using a model boat.
When this function is active, the throttle channel is set to its
lowest position and the brake functionality is disabled.
To toggle this function, select the box beside [
Normal mode
].
When the function is active, the text beside the box will change
to [
Boat mode
].
Select the
icon to reset the function.
Select the
icon to return to the previous menu.
6.16 Brake Mixing
This function enables you to use models that require more than one
braking channel, for example a model that has separate brakes for front
and back braking.
If your model uses extra channels for braking, each channel can be
controlled separately and are slaves of the throttle channel.
To set the function:
1. Select [
CH3
] or [
CH4
] for braking.
2. Set the [
Exponential
] and [
A.B.S.
] functions as described earlier.
Select the icon to reset the function.
Select the
icon to return to the previous menu.