Quick guide
7
Quick guide
Before you start
The following preparatory steps must be made:
1. Pay attention to the general information, safety in-
formation and notes on setting up and connecting
the device (see page 8 - 12).
2. Check the contents of the package for completeness
and damages.
Note
Pay attention to the information in the separate
quick guide.
Establishing the connections
Note
Pay attention to the minimum radius when laying
cables. Do not kink the cable.
1. Connect the network cameras and the LAN connec-
tion on the device to the network.
2. Set up the connection to the mains power supply, the
Power LED lights up.
Configuring the device
Note
Pay attention to the information in the separate
quick guide.
• You must configure the following settings in
sequence:
• Camera
• I/O module
• Drive
• Actions
• Network
• Security
• Other
To Next Page
Loading...