Accu-Chek ADVANTAGE - Accu-Chek Advantage Time and Date Settings

5. Press and hold down the
ON/OFF button until the
test strip symbol flashes or
code and “---” appear to
leave this function.
Setting the Time and Date
Do I have to set the time and date?
Time and date should be set prior to testing if you plan
to download the results into software or if you plan to
review the memory to check when a test was done.
To set the time and date:
1. Press and release the
ON/OFF button to turn the
meter ON.
2. Wait until the test strip
symbol flashes or code
and “---” appear before
proceeding to step 3.
3. Press and hold down the
ON/OFF button until “set”
appears at the bottom of
the screen. Release the
ON/OFF button.
4. Press and release the
ON/OFF button to confirm beeper setting and move
to set the time.
6