Accu-Chek Nano User Manual

32
8. Gently squeeze your finger to
assist the flow of blood. This
helps you get a blood drop.
9. Touch the blood drop to the
front edge of the yellow
window of the test strip. Do
not put blood on top of the
test strip. The meter beeps
and
flashes when there is
enough blood in the test strip.
The result appears on the
display.
10. If you want to mark the test
result with a pre‑meal, post‑
meal, or general marker,
leave the test strip in the
meter. See Chapter 3,
Marking Test Results and
Setting the Post‑Meal Test
Reminder. Otherwise, discard
the used test strip. After a
successful test, the meter
turns itself o 5 seconds after
the test strip is removed.
WARNING
If mg/dL does not appear with the test result, contact the ACCU-CHEK Customer Care Service
Center at 1-800-858-8072. Use of the wrong unit of measure may cause misinterpretation of your
actual blood glucose level, and may lead to incorrect treatment.

Accu-Chek Nano Specifications

General

Display Type	LCD
Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	500 results
Automatic Power Off	Yes
Memory	500 results
Dimensions	69 x 43 x 20 mm
Weight	40 g with batteries
Measuring Range	0.6 - 33.3 mmol/L
Operating Conditions	10 - 90% relative humidity