ACE Lab PC-3000 Express - Page 38

01010101100110101010110011010101011001101010101100110101010110011010101011001101010101100110
10011010
1010110011010101011001101010101100110101010110011010101011001101010101100110101010110011010101011011010101011
10101010110011010101011011010101001101010100110101101101101010100101
1011010101100110011010101011010101111010111
11010101101101010100111110
110111
0110110011
0111011110
111101
011
11
1
Seagate PC-3000 EXPRESS / UDMA / PORTABLE 
F3 architecture  ACE Lab
Technical support: ts@acelab.ru
Phone: +7 863 201 50 06
38 ts.acelaboratory.com
Fig. 6.18
After scanning completion the utility will output to a separate 'Defects' tab the list of found defects and slower access
areas. Then use the shortcut menu of the list (displayed after right-clicking it) to select hiding of the revealed defects to
the HDD translator. The P-List module will not be modified at that. Defects will be hidden specifically in the translator
(as it happens during the last stage of factory testing). To hide the found defects, select in the menu the 'Hide to Slip-
List' (Ctrl+1) command.
Fig. 6.19