2-20 System Utilities
A key code is generated for use with unlocking utility. Make note of this code.
3. On separate, compatible device, boot to DOS.
4. Execute UnlockHD.exe (Figure 2-21) to create a password unlock code. Use the format
<UnlockHD [key code]> with the code noted in Figure 2-21.
Example: UnlockHD 54591747
The command generates a password which can be used for unlocking the HDD.
Password: 41499389
Figure 2-22. Unlock Password
5. On original device, enter password (Figure 2-22) in Enter Unlock Password dialog
(Figure 2-23).
Figure 2-23. Unlock Password Dialog
Enter Unlock Password (Key:54591747)?
********
To Next Page
Loading...
