34 Chapter 2
Primary/Secondary IDE When this item is enabled, the system power will
resume the system from a power saving mode if
there is any activity on primary or secondary IDE
channels 0 or 1.
Enabled
Disabled
FDD, COM, LPT Port When this item is enabled, the system will restart
the power-saving timeout counters when any
activity is detected on the floppy disk drive, serial
ports, or the parallel port.
Enabled
Disabled
PCI PIRQ[A-D]# When this item is enabled, any activity from one
of the listed devices wakes up the system.
Enabled
Disabled
Parameter Description Options
To Next Page
Loading...
