Item Icon Function Description
1
Infrared
transmitter
Sends signals to the projector.
2 Laser pointer Aim the remote at the viewing screen..
3 FREEZE To pause the screen image.
4 HIDE
Momentarily turns off the video. Press "HIDE" to
hide the
5 RESYNC
Automatically synchronizes the projector to the
input source.
6 SOURCE
Press “SOURCE” to choose from RGB, Com-
ponent-p, Component-i, S-Video, Composite,
DVI-D, Video and HDTV sources.
7 POWER
Refer to the “Turning the Projector On/Off” sec-
tion.
8
ASPECT
RATIO
To choose the desired aspect ratio
(Auto/4:3/16:9).
9 ZOOM Zooms the projector display in or out.
10 Laser button
Aim the remote at the viewing screen, press and
hold this button to activate the laser pointer.This
function is not supported in Japanese market.
11
Empowering
key
Unique Acer functions: eOpening, eView, eTimer
Management.
12 KEYSTONE
Adjusts the image to compensate for distortion
caused by tilting the projector (± 16 degrees).
13 MENU
To launch the onscreen display (OSD). To exit
the OSD, press“MENU” again and conrm your
selection.
14 PAGE
For computer mode only. Use this button to
select the next or previous page. This function is
only availablewhen connected to a computer via
a USB cable.
15 RGB Press “RGB” for true-color optimization.
To Next Page
Loading...
