Acer P5270 - XGA DLP Projector - Page 24

1-19
P5270/P5270 Refresh
Condential
16
BRIGHTNESS
Press “BRIGHTNESS” to adjust the brightness of the
image.
17
CONTRAST
Use the “CONTRAST” option to control the differ-
ence between the lightest and darkest parts of the
picture.
18
COLOR
Press “COLOR” to adjust the color temperature of
image.
19
VGA
Press “VGA” to change source to the VGA connec-
tor. This connector supports analog RGB, YPbPr
(480p/576p/720p/1080i), YCbCr (480i/576i) and
RGBsync
20
COMPONENT
Press “COMPONENT” to change source to Com-
ponent video.This connection supports YPbPr
(480p/576p/720p/1080i) and YCbCr (480i/576i).
21
S-VIDEO To change source to S-Video.
22
VIDEO To change source to COMPOSITE VIDEO.
23
DVI
Press “DVI” to change source to DVI. This con-
nection supports digital RGB, analog RGB, YPbPr
(480p/576p/720p/1080i),YCbCr (480i/576i) and
HDCP signals.
24
HDMI™
To change source to HDMI™. (for the model if with
HDMI™ connector)
25
MUTE To turn on/off the volume.
26
WIRELESS
Press “WIRELESS” to display the image which is
wirelessly transmitted from the PC to the projector via
the “Acer eProjection Management” utility. (for wire-
less model)
27
KeyPad 0~9
Press “0~9” to input a password in the “Security set-
tings”.