Acer X1160' - Disassemble Lamp Driver Module

X1160 Family/X1260 Family Condential 2-15
2-14 Disassemble Lamp
Driver Module
1. Unplug 1 connector and unscrew 1 screw
on lamp driver module
2. Unplug 1 connector and unscrew 2
screws on lamp driver to lamp cable
Note: The lamp driver to lamp cable must be pass
through two Dents.(As the yellow square)
3. Unplug 2 connectors to disassemble
3PIN and 5PIN cable
Note:The 3 PIN and 5 PIN cable must be pass
through a Dent.(As the yellow square)
4. Unscrew 4 screws on lamp driver module
Lamp Driver to Lamp Cable
3 PIN&5 PIN Cable
Lamp Driver Module
1
3
4
2