X1160 Family/X1260 Family Condential
5-8
5-5 Waveform Download (for refresh models and X1160P/
X1160PZ/X1260P)
(1) Hold on “Power“ button then plug in the Power Cord
Note: At this moment ,Power LED ash in blue and red about 2 seconds until Power
LED ash in blue only for 2 seconds, please release the power botton
(2) After ashing, LED is in steady condition and you can judge the actions as the
following table:
Power LED status Result
Red OK
Blue + Red (It will light on red
only after 10 seconds) Fail
To Next Page
Loading...
