Acer X1160' - Assemble Lamp Driver Module

X1160 Family/X1260 Family Condential 2-22
2-21 Assemble Lamp Driver
Module
1. Screw 4 screws to assemble lamp driver
module on lamp driver holder
2. Plug 2 connectors to assemble 3PIN and
5PIN cable
Note:The 3 PIN and 5 PIN cable must be pass
through a Dent.(As the yellow square)
3. Plug 1 connector and screw 2 screws to
assemble lamp driver to lamp cable
Note:The lamp driver to lamp cable must be pass
through two Dents.(As the yellow square)
4. Plug 1 connector and screw 1 screw on
lamp driver module
3 PIN&5 PIN Cable
Lamp Driver Holder
Lamp Driver Module
4
2
3