Acer X1160' - USB Driver Upgrade Procedure

X1160 Family/X1260 Family Condential
5-4
5-3 USB Driver Upgrade
Procedure
1. set up
- Plug Power Cord in projector.
- Link PC USB port and projector USB port
by USB Cable.
2. Execute Program
(1) “Found new hardware wiszard” will be
appearred on the screen.
(2) Select “Install the software automatically
(Recommended)”.
(3) Then click “Next”.
3. Finish
- Click “Finish” to end the installation.
Note:If you have installed the USB driver,
there is no need to perform this action.
(2)
(3)