X1160 Family/X1260 Family Condential
6-4
3. Programming
(1) Key in the serial number into the
barcode blank space.
(2) In "Write Source Select" make a check
in "Analog".
(3) Click "Program".
4. Change the cable to Analog
- Message box appears on the screen,
then click "OK".
5. When the EDID program for VGA is
completed, a message "OK" will appear on
the screen.
6. (1)In the Read item,select “Analog” and
“Trans”.
(2)Please press “Read” button.
7. EDID Informations will show the result.
To Next Page
Loading...
