20
12. USB Port Select: Set the USB port type to C-Type or B-Type or Auto.
13. USB 3.2: Default is "On". It can control determine the USB bandwidth.
• USB 3.2 = "On" is Default.
14. Power-off USB Charge: Select "On" to supply power to the USB port and select "Off" to
turn on DC off/Power saving mode.
Setting the KVM
1. You can follow below instruction to set up KVM for your monitor:
• Connect Type-C/USB-B to your computer
• Select Type-C/USB-B of USB Port Select in the OSD
• Suggest setup:
Note: When connecting two computers to the monitor, configure the USB
settings from the OSD menu to share a single set of keyboard and mouse
connected to the monitor between two computers.
Note: 1. To comply with international energy standards, this display is currently set to
power saving mode, which disables certain functions when display is put to
sleep (standby) and has power off (DC off) status.
2. Switching "Power-off USB Charge" to "On" enables all display functions and
may consume more power.
Adjust
OK
USB Port Select
Auto
Adjust
OK
B-Type
C-Type
Auto
AUDIOHDMI2 HDMI1 DP ALTDPUSB-A
AC
USB-A USB-B
USB-A to keyboard/mouse USB-B/DP/HDMI to PC
Type-C to laptop
To Next Page
Loading...
