ACLAS TS5X - Tare and Zeroing Operations

12
Tare Operation 4.3.
It is only applicable to the commodity packed in package or container such as eggs, beans or fruit, etc.
Sales example: One carton of apples is sold. Assume the weight of carton is 1.000kg. The net weight of
apple is 2.000kg and unit price is 6.00$/kg.
1. Put on the carton, and then press ‘->T<-’ key
OPERATION
KEY
DISPLAY
Tare (kg)
Weight(kg)
Unit price($/kg)
Total($)
1. Put carton weighing 1.000 kg on the scale.
0.000
1.000
0.00
0.00
2. Press ‘->T<-’ key.
->T<-
1.000
0.000
0.00
0.00
3. Put apples weighting 2.000kg on the scale.
1.000
2.000
0.00
0.00
4. Press the picture of apple.
Apple
1.000
2.000
6.00
12.00
5. After taking away this carton of apples,
press ‘->T<-’ key to cancel tare.
->T<-
0.000
0.000
0.00
0.00
2. Input the tare value, and then press ‘->T<-’ key
OPERATION
KEY
DISPLAY
Tare (kg)
Weight(kg)
Unit price($/kg)
Total($)
1. Input the tare value.
1000
0.000
0.000
0.00
0.00
2. Press ‘->T<-’ key.
->T<-
1.000
0.000
0.00
0.00
3. Put apples weighting 2.000kg on the scale.
1.000
2.000
0.00
0.00
4. Press the picture of apple.
Apple
1.000
2.000
6.00
12.00
5. After taking away this carton of apples,
press ‘->T<-’ key to cancel tare.
->T<-
0.000
0.000
0.00
0.00
Note: When inputting tare value, the unit is ‘g’, and the minimum tare value is 0.002kg and display with
the times of 0.002g.
3. Presetting tare value
This operation is to preset the tare value of one commodity. The operation step is: click ‘Settings’ on the
function screen — ‘Program’ — ‘Plu’— choose the PLU that is to preset tare value — click
‘Edit’—‘Common’—‘Tare’—‘Mode’, then choose ‘Ignore Tare, Weight or Tare Table’.
Note: Steps can be seen in the chapter 5.2.1.1. PLU Setting.