ACLAS TS5X - Long Click to Choose Tare; Feed

18
4.6.7. Long Click to Choose Tare
This function is for choosing conveniently a tare type of the product that is on the tray for selling.
Operation steps are as following:
Note:
Before this operation, please preset the tare table, operation steps can see the chapter Tare Edition.
4.6.8. Feed
This function is for adjusting the paper when it feeds abnormally or ectopically. Click ‘Feed’, and the paper
will be adjusted.
2. Choose a tare type here
1. Long press here
Click here