ACO 6226 - Mode Set

25
3. Mode Set (2/2)
<Mode Set> 2/2
Range : 130dB
Dyn cher : FAST
Freq corr : A
Meas time : 1s
View : L05
baud rate : 9600
● Range ：130dB ：Shows a range value set with
Range
key.
● Dyn cher ：FAST ：FAST , SLOW or Imp. In general measurement
Shows Time weighting set with
F ・S ・Imp
key.
PEAK is displayed and fixed in peak measurement.
● Freq corr ：A ：Shows Frequency weighting set with
A ・C ・ Flat
key.
● Meas time ：1s ：Shows Measurement time set with
Meas time
key.
● View ：L05 ：Mode setting in Normal and Magnified display mode.
● baud rate ：9600 ：Baud rate setting
4800, 9600 or 19200.
・ Contents are updated every time you change the settings.
・ You can change Range etc. in this menu.