Need help?Do you have a question about the ACO 3116 and is the answer not in the manual?
General| Brand | ACO |
|---|---|
| Model | 3116 |
| Category | Measuring Instruments |
| Language | English |
Provides a general introduction to the vibration meter, its features, and purpose.
Details the physical components and controls of the vibration meter.
Explains the display elements and information shown on the vibration meter's screen.
Covers essential setup procedures before operating the vibration meter.
Guides users on configuring measurement modes, calendar, and display settings.
Describes how to perform measurements for acceleration, velocity, and displacement.
Provides supplementary technical data and standards related to vibration measurement.
Explains how to use optional accessories and connect the device to a PC.
Lists detailed technical data for the accelerometer and the main unit.
Defines symbols and terms used for safety warnings and cautions.
Outlines essential safety instructions to prevent hazards and damage.
Provides important advice for safe and proper operation of the instrument.
Highlights the main capabilities and advantages of the vibration meter.
Lists the standard items included with the vibration meter package.
Details the warranty period and terms for repair.
Describes the buttons and display on the front of the device.
Explains how to navigate menus and operate controls using buttons.
Details the terminals and connectors on the main body of the device.
Covers identification labels and battery compartment details.
Explains the accelerometer unit and how to connect it via cables.
Identifies and explains all parts of the main measurement screen.
Describes various status icons, battery level, and display modes.
Illustrates the different menu screens and their contents for configuration.
Guides on installing batteries or connecting the AC adapter.
Instructions for turning on the device and its initial display.
Step-by-step instructions for connecting the accelerometer and main unit.
Discusses various methods for attaching the accelerometer to a measurement object.
Details the process of fixing the accelerometer using screws or magnets.
Explains alternative mounting methods using contact pins or double-sided tape.
Covers setting operational modes and adjusting calendar time.
Explains how to adjust LCD contrast and output settings.
Procedure to turn on the device and prepare for measurement.
Instructions for measuring acceleration values.
Instructions for measuring velocity values.
Instructions for measuring displacement values.
How to record, retrieve, and delete measurement data.
Setting up the device to output measurement signals.
Presents the frequency response characteristics for velocity measurements according to JIS standards.
Instructions for connecting and using the optional AC adapter.
Configuration steps for serial communication via RS-232C.
Guides on establishing a physical connection between the PC and the device.
Specifies the commands and data format for serial communication.
Describes the sequence for data transmission between the device and PC.
Introduces the software used for managing collected data.
Lists the technical details of the accelerometer sensor.
Details the measurement ranges, frequency response, display, and power requirements.
Shows the linear relationship between measured values and AC output voltage.
Illustrates how measurement range depends on frequency.
Solutions for problems where the meter does not operate.
Addresses issues related to incorrect or absent display readings.
Provides remedies for key operation failures and data issues.
Step-by-step guide for handling BNC connectors.
Step-by-step guide for handling F-type connectors.
Basic steps for setting up the device and installing batteries.
Instructions for using the AC adapter and powering on the meter.
Explanation of the purpose and operation of each button on the device.
Detailed breakdown of the information displayed on the main screen.
To Next Page
