― 27 ―
136.0
Display of a state
The recording number
Measurement
Data deletion
You can see the recorded data with Meas of Menu 1/3 is set to Mem Clr.
01/01 12：01
Cursor button
m/s
2
Menu
0 Range 200
016/016 Memory RMS
Save/Set
1) When you press the
Menu
button the following screen appears.
2) Select
Meas
with
Cursor
button , then move the cursor rightward with cursor button .
<Menu> 1/3
Meas :Men Clr
I/O :OFF
Date :00/00/00
Time :00:00:00
3) Set the
Mem Clr
with cursor button , then press
Save/Set
button to save the setting.
Clear
Save/Set Key
4) It delete the data with
Save/Set
.
5) If you want to go back to the measurement mode, pressing it three times returns to the
Menu
button.
6）The recording number / Total data becomes 000/000.
000/000
Total data
The recording number
To Next Page
Loading...
