How to Measure Vibration meter using 3116
１．Setting up
１－１ Battery installation
This operates with two alkali dry cells (LR03) or an AC adaptor AC-1046 (Option).
１）When the unit is in operation, turn off the power by pressing the
Power
switch.
２）Hold down the hollow of the back of a battery cover and slide to the lower direction.
To a direction with aggressiveness
３）Insert two alkali dry cells (LR03) in the direction indicated in the battery case and close the
battery cover.
The battery life is changed by environment to be used.
It is possible to continuation use for about 12hours in case of two alkali dry cells AAA.
！ CAUTION
● Please be sure to remove a tow dry cells(LR03), when there is no schedule used for a week or
more. It may become the cause of failure by liquid leak.
● Please put in correctly polar "+" and "－" of a dry cell not to mistake.
Moreover, please put in the new dry cell of the kind with four [same] at the time of exchange.
A different kind and use of old and new is cause failure.
To Next Page
Loading...