1.5. Safety Considerations, Explicit Definitions
The ACOM 1000 HF + 6 meters Linear Amplifier is a Safety Class I unit regarding protection against electric
shock. The third grounding lead of its mains cord (which is colored yellow with two green stripes) and the
ground stud on the rear panel of the amplifier (marked GND, see Figure 2-1 Rear panel - Connections, Pos. (a))
must be connected to the station's grounding system for safe operation.
The amplifier is designed to meet international safety standards and complies with CE safety and
electromagnetic compatibility requirements, as well as FCC regulations.
This User's Manual contains information, warnings (signal words Danger, Warning, Caution and Notice) and
instructions, related to hazards, that should be followed by the user in order to ensure safe operation and
to keep the amplifier in a safe working condition at all times.
The EXPLICIT DEFINITIONS described below apply to this User's Manual:
DANGER
These notes call attention to a procedure or instructions which, if not correctly
performed, will result in serious personal injuries and even death.
WARNING
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in serious personal injuries and even death.
CAUTION
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in minor or moderate personal injuries.
NOTICE
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in property damage or equipment damage not exclusively to
the amplifier but also to connected equipment.
To Next Page
Loading...
