1.2. Owner Assistance
If assistance is needed, you should contact your local dealer first. If necessary, your dealer will contact
ACOM for additional guidance.
If you still have an issue you need to discuss with one of ACOM's specialists, the contact information is as
follows:
ACOM Ltd.
E-mail: support@acom-bg.com
Bulgaria | Bozhurishte 2227
Sofia-Bozhurishte Economic Zone | 6 Valeri Petrov Str.
GPS coordinates: 42.748616
о
| 23.209801
о
1.3. Equipment Supplied
The ACOM 1000 amplifier and this User's Manual are shipped in a cardboard carton.
1.4. Features
• Easy to operate
The TRI (True Resistance Indicator) is a powerful tuning aid which, together with the automatically
controlled input attenuator, helps the operator to quickly and precisely match antennas (5-10 seconds
typically). The auto-operate function (when enabled) maintains the amplifier in OPERATE mode for
you, thus saving manual operations and time.
• No antenna tuner needed
No heavy outboard antenna tuners required for antenna SWR up to 3:1 (and higher on some bands).
Your amplifier will perform the functions of an antenna tuner, thus enabling you to change antennas
faster and use them over a wider frequency range (saving tuning time).
• User-friendly and durable
An amplifier that is both user-friendly, and that looks after itself. It is designed to safely withstand up
to 300 W reflected power, up to 100 milliseconds duration of drive spikes, drive RF "tails" after a PTT
or KEY release, operator's inadvertent tuning errors etc. It would also not cease to function with a
"soft" AC line and would deliver more than half power at only 75% of nominal mains voltage. It would
withstand up to 10 milliseconds (down to zero) voltage drops, and up to +15% line voltage spikes,
which is important particularly when used at field days, DXpeditions, and other portable events.
• OLED comment display
All amplifier status indications are explained via detailed text displayed on the dot matrix display
OLED. The upper-line's strip on the OLED always reads peak forward power. LED indicators are
provided for OPERATE, attenuation-on, and ON/OFF conditions.
To Next Page
Loading...
