Acom 1010 User Manual

User's Manual | ACOM 1010 | HF Linear Amplifier
July 2021
S e c t i o n GENERAL INFORMATION | Page
11
of
40
Information notes described below apply to this User's Manual:
These notes highlight operating procedures or practices that may improve equipment
reliability and/or personnel performance, or to emphasize a concept.
ORANGE TEXT as LINKS
marks all internal links in the document between Sections, Figures, Tables, etc. for your
convenience.
The safety instructions contained in this User's Manual feature specific signal words
(Danger, Warning, Caution or Notice) and, where required, a safety alert symbol, in
accordance with actual standards ISO 3864 or ANSI Z535.

Acom 1010 Specifications

General

Complies with CE safety and electromagnetic compatibility requirements, as well as FCC regulations	Yes
Power Output	1000 W PEP
Modes	SSB, CW, RTTY, AM, FM
Power Supply	200-240VAC or 100-120VAC, 50-60Hz, single phase.
Cooling	Forced air
Harmonic Output	-50 dB
Input Impedance	50 Ohms
Output Impedance	50 Ohms
Tube	4CX800A