23
4. The meter will count down from 9 to 1 and then
display the measurement results. The meter will also
beep to indicate that measurement is complete.
To m ar k i nva li d r es u lts an d t o pr eve n t th em f r om
being included in the 7, 14 and 30 day averages,
press the M and S buttons together. A pound sign (#)
will appear on the display to show that the result will
not be included when calculating the 7, 14 and 30
day averages. If a result is
marked by accident, press the M and S buttons again to unmark the result.
After marking the invalid result, run the test again with a new test strip.
If an error message appears on the display, refer to the on page 32. If a "HI" or
"LO" error appears on the display, refer to "HI" and "LO" messages below.
5. After inspection, record valid results in your logbook with the date and time,
and compare them to the target goals set by your healthcare professional.
Refer to Suggested Testing Times and Target Goals on page 30 and your
logbook for more details on your target blood glucose concentration goals.
6. Remove and discard the test strip.
To Next Page
Loading...
