Acorp 6BX86 User Manual

The information presented in this publication has been
made carefully for reliability; however, no responsibility
is assumed for inaccuracies. Specifications are subject
to change without notice.
IBM, PC/AT, and PC/XT are trademarks of Interna-
tional Business Machines Corporation.
Pentium is a trademark of Intel Corporation
AWARD is a registered trademark of Award
Sofftware Inc.
MS-MOS and WINDOWS NT are registered trade-
marks of Microsoft Corporation.
Trademarks and/or registered trademarks are the
properties of their respective owners.
User's Manual Version 1.4
6BX/ZX/VIA86/VIA86P

Acorp 6BX86 Specifications

General

Form Factor	ATX
Socket Type	Socket 7
Chipset	Intel 430VX
Maximum Memory	128 MB
IDE Ports	2
PCI Slots	4
BIOS	Award BIOS
Supported Processors	Intel Pentium, AMD K5, AMD K6
Expansion Slots	4x PCI
Memory Type	SDRAM

Summary

Chapter 3 Installation

Jumper Settings

Explains how to configure jumpers for hardware settings.

System Installation Setup

Static Electricity Precaution

Real Time Clock (RTC) RAM - JP7

CPU External (BUS) Frequency Selection

CPU to BUS Frequency Ratio- JP1

System Memory (DIMM Module)

Information on supported DIMM memory modules and installation.

DIMM Memory Installation

Detailed instructions for inserting DIMM memory modules into slots.

168 Pin DIMM Memory Socket

Central Processing Unit (CPU)

Details the main board's SEC slot for Pentium II/III processors.

Installing the Retention Mechanism

Step-by-step guide to install the CPU retention mechanism.

Installing Boxed Processor

Instructions for mounting the heatsink supports for a boxed processor.

Removing the Processor

Step-by-step guide to safely remove the CPU from the system board.

Installing OEM Processor

Guides on installing Intel Pentium II/III processors in OEM packaging.

External Connectors Overview

CPU Cooling Fan Connectors (FAN1-3)

Primary/Secondary IDE Connectors

ATX Power Supply Connector (PW1)

Explains the connection to the ATX power supply and its pin alignment.