ACP ARX1 - Model Identification; Online Oven Resources; ACP Programming Application; Firmware Updates

©2018 ACP, Inc.
Cedar Rapids, IA 52404 Page 5 of 80
Part No. 16400033
Original Instructions
Model Identication
Any questions or to locate an authorized ACP servicer,
call ACP ComServ Service Support.
– Inside the U.S.A. or Canada, call toll-free at
866-426-2621.
– Outside the U.S.A. and Canada, call 319-368-8195.
– Email: commercialservice@acpsolutions.com
Warranty service must be performed by an authorized
ACP servicer. ACP also recommends contacting an
authorized ACP servicer, or ACP ComServ Service
Support if service is required after warranty expires.
When contacting ACP, provide product information.
Product information is located on oven serial plate.
Record the following information:
Model Number: _____________________________
Serial or S/N Number: ________________________
Date of installation: __________________________
Dealer’s name and address: ___________________
__________________________________________
__________________________________________
Online Oven Resources
ACP Programming Application
Download and install the ACP Programming Application to create, edit, and customize menu
and display settings for your oven, using a desktop computer or tablet.
To download the latest and greatest version of the ACP Programming Application
please visit acpsolutions.com/oven-programming/
Firmware Updates
For the optimal user experience, ACP recommends using the latest version of oven rmware.
To download rmware updates and installation instructions, or to opt-in for email update
notications, please visit acpsolutions.com/oven-programming/
Before servicing this oven, please take the time to read the Safety Instructions contained in this manual.
Information herein is subject to change without notice. Errors are subject to correction.
For the most recent product literature, please visit acpsolutions.com/product-literature/