©2018 ACP, Inc.
Cedar Rapids, IA 52404 Page 39 of 80
Part No. 16400033
Original Instructions
Service Test Mode
Service Test Mode:
The Service Mode is a useful tool to aid in diagnosing any service issue. To
access the oven’s Service Test Mode, the PIN Code must be enabled. If the
PIN Code is not enabled, enable it (see below). To determine if the PIN CODE
is enabled, press the Blue Menu Icon. If the PIN Code prompt appears it is
enabled. The Touch Control System installed in this model is used in other
ovens, so some components tests will not work properly.
With the PIN Code enabled:
1. Press Green start pad.
2. Press the Blue Menu Icon and the PIN Code prompt will display.
3. Enter, in order, 1, 3, 5, 7, 9 (the odd numbers) and the Service
Mode is initiated.
With the PIN Code not enabled:
If the PIN Code is not enabled, it must be enabled in the User’s Options.
1. With oven on, press the Blue Menu Icon at the bottom of the
screen and the PIN Code prompt will display.
2. Scroll screen to User Options and press it.
3. Scroll screen to PIN Code (it will say “DISABLED” underneath) and
press it.
4. Press the radial pad “On” and ensure it is lit.
5. Enter 1,2,3,4 as PIN Code and memorize, take a picture, or write it
down.
6. Press the Home Icon to return to Main Screen.
2
2
3
6
To Next Page
Loading...
