Not connected
• This icon is shown during device start-up, when workstation is turned off or if there is a connection problem.
Connected
• The medical device is ready to perform acquisitions, calibrations and quality tests.
3.2 SWITCHING OFF
• To turn the system off, proceed as follows:
• Press the EXIT
button in the MENU BAR of the AIS software.
• Turn the X-MIND trium workstation off.
• Switch OFF the medical device by setting the main switch to off. The main switch is located on the lower part of the patient
support.
CAUTION :
Always switch the system off during long period of inactivity like night time, weekends and holidays.
To Next Page
Loading...
