Record Video Clip
Check the item and select a video recording storage type, <SD Card> or
<NAS> (Network-Attached Storage). The alarm-triggered recording will
be saved into the microSD/SD card.
Pre-trigger buffer recording function allows users to check what caused
the trigger. The pre-trigger buffer time range is from 1 to 3 sec. Select
<Upload for __ sec> to set the recording duration after alarm is triggered.
The setting range is from 1 to 99999 sec. Select <Upload during the
trigger active> to record the triggered video until the trigger is off.
NOTE: Please make sure the local recording (with microSD/SD
card) or the remote recording (with NAS) is activated so that this
function can be implemented. Refer to section Recording for
further details.
Save
Click on <Save> to save all the settings mentioned above.
To Next Page
Loading...
