ACTi A950 - Audio (Audio Mode and Bit Rate Settings)

82
2.3.8 Audio (Audio Mode and Bit Rate Settings)
The Audio Mode setting can be found under this path: Streaming> Audio.
In this page, the administrator can adjust the sound transmission mode, the
audio gain levels and the audio bit rate. Setting for enabling sound recording to
the microSD/SD card is also available.
Transmission Mode
 Full-duplex (Talk and Listen simultaneously)
In the Full-duplex mode, the local and remote sites can communicate
with each other simultaneously, i.e. both sites can speak and listen to
the other side at the same time.
 Half-duplex (Talk or Listen, not at the same time)
In the Half-duplex mode, the local / remote site can only talk or listen to
the other site at a time.
 Simplex (Talk only)
In the Talk only Simplex mode, the local / remote site can only talk to the
other site.
 Simplex (Listen only)
In the Listen only Simplex mode, the local / remote site can only listen to
the other site.
 Disable
Select the item to turn off the audio transmission function.
Server Gain Setting
Set the audio input / output gain levels for the sound amplification. The audio
input gain value is adjustable from 1 to 10. The audio output gain value is
adjustable from 1 to 6. The sound will be turned off if the audio gain is set to
“Mute”.