ACTi A950 - Video Configuration

73
2.3.1 Video Configuration
The Video Configuration setting can be found under this path: Streaming>
Video Configuration.
Encoding
Select <Yes> from the drop-down menu to enable Stream 2~Stream 4 encoding.
Or select <No> to disable the streaming encoding.
Encode Type
The available video resolution formats include H.265, H.264, and MJPEG.
Users can select the preferred encode type from the drop-down menu.
Resolution
Video format and resolution combination will vary by users’ configuration. The
following lists the default resolution of different IP camera models.
IP Camera Models
Default Resolution
8M
Models
(F/B/K/6)
Linear Mode
(60/50 fps)
H.265/H.264- 3840 × 2160 (30/25 fps) +
H.265/H.264- 1920 × 1080 (30/25 fps)
HDR Mode
(WDR 2 Shutter)
H.265/H.264- 3840 × 2160 (30/25 fps) +
H.265/H.264- 1920 × 1080 (30/25 fps)
Stitching
Bullet
Model
(3)
Linear Mode
(60/50 fps)
H.265/H.264- 5120 × 1440 (30/25 fps) +
H.265/H.264- 2560 × 720 (30/25 fps)
HDR Mode
(WDR 2 Shutter)
H.265/H.264- 5120 × 1440 (30/25 fps) +
H.265/H.264- 2560 × 720 (30/25 fps)
Fisheye
Model
(8)
4M Front End
H.264- 2048 x 2048 (25 fps)
12M Back End
H.264- 4000 x 3000 (20 fps)
Framerate
Video framerate is for setting the frames per second (fps) if necessary.
 8M Models (F/B/K/6)
The default setting of Stream 1 is 30 fps (NTSC) or 25 fps (PAL). The
maximum framerate range of each stream will change according to the
selected video resolution.