ActionTec ScreenBeam 960 Deployment Guide

13
© 2018 Actiontec Electronics Inc. All rights reserved. ScreenBeam Deployment Guide
4.3 Classroom
The recommended setup for a classroom environment is to place the ScreenBeam 960
receiver on a LAN/VLAN dedicated to the ScreenBeam. This will allow the teacher/staff
member to present directly.
In this scenario, the network administrator must configure the required ports for the staff client
system to communicate and stream to ScreenBeam receiver.

ActionTec ScreenBeam 960 Specifications

General

Brand	ActionTec
Model	ScreenBeam 960
Category	Receiver
Language	English