ActionTec ScreenBeam 960 Deployment Guide

16
© 2018 Actiontec Electronics Inc. All rights reserved. ScreenBeam Deployment Guide
5.3 iOS Native Screen Mirroring
To initiate iOS native screen mirroring:
1. Swipe upward from the bottom of the iOS device screen to bring up the Control
Center, or inward from the top-right corner on newer versions of iOS, then tap on the
Screen Mirroring button:
2. A list of receivers will pop up on the screen. Select the ScreenBeam receiver to
present to by tapping on the receiver name:

ActionTec ScreenBeam 960 Specifications

General

Brand	ActionTec
Model	ScreenBeam 960
Category	Receiver
Language	English