EasyManua.ls Logo

Adam AE-202 - Battery Operation; Battery Status and Prompts; Power Management Features; Battery Life Expectancy

Adam AE-202
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©Adam Equipment Company 2008
13
6.0 BATTERY OPERATION
6.1 BATTERY CAPACITY
During switching the power of the indicator to on or off, if the display
shows “Pbt 85 it means battery capacity is 85% of the full capacity.
6.2 BATTERY CHARGE PROMPT
When battery capacity is less than 30%, the LED indicator above “Lo Bat
will be on to remind that the battery needs to be re-charged.
When battery capacity is less than 20%, the indicator will be flickering to
remind to charge immediately.
6.3 OVER-DISCHARGE PROTECT
When battery capacity is less than 10%, the indicator will be switched off
automatically to avoid battery over-discharge.
6.4 POWER SAVING MODE
Auto power saving mode: If there is no weighing operation for 3 minutes
and if auto power off mode has been set, the display will show [ - ] to
minimize the battery consumption.
6.5 AUTO POWER OFF
Auto power off mode: If there is no weighing operation for 15 minutes and
if auto power off mode has been set, the power will be switched off
automatically.
6.6 BATTERY LIFE
The battery life of 6V / 4Ah built-in maintain-free battery supplied with the
indicator is 48 hours if it is fully charged.

Related product manuals