3.0 UNPACKING THE SCALE
• Remove the 2 sets of pallet beams using the handles provided.
• Take care while removing the beams to avoid banging or injury.
• Remove the Indicator and the power supply adapter packed
separately.
• Place it on a level and firm floor.
• Position the beams side by side.
• Plug in the Indicator into the socket provided at the back of
the pallet beams.
• Ensure both the beams are connected.
• Switch the main supply to ON.
• Read this User Manual before starting the weighing
operation.
•
Place the pallets on the beams for weighing.
To Next Page
Loading...
