3-26
Storage Manager
Battery Backup Configuration Window – Adaptec 3200S/
3210S/3400S/3410S Only
This option enables you to view the status of the battery backup
module, as shown in Figure 3-13, and set operating parameters
when the battery capacity reaches a predetermined level.
The battery status and available backup capacity (in hours) is
displayed. You can use the Backup Capacity Warnings options to set
a threshold for entering Write-Through mode and issuing failure
warnings when the battery charge drops below the defined level.
Note: During the initial calibration or maintenance cycle for
a battery backup module, the controller operates in Write-
Through mode to ensure data is always written to the array.
Figure 3-13. Battery Backup Configuration Window – SCSI
To Next Page
Loading...
